Gymnastics Bars
AAI ELITE Uneven Bars

|
|
AAI ELITE Uneven Bars
$3900.00
|
AAI CLASSIC Uneven Bars

- Perfect for smaller facilities - still meets all FIG and USAG requirements
- Specifications: Top Bar - 2250mm to 2450mm; Bottom Bar - 1450mm to 1650mm; Width - 600mm to 1630mm at FIG height
- Require four floor plates (not included)
|
AAI CLASSIC Uneven Bars
$3900.00
|
Note : Cable Tightener Safety Notice - Due to the increased number of width adjustments that cabled uneven bars are exposed
to, we strongly recommend that the cable tighteners be replaced on an annual basis or when excessive wear is evident. Parts are available. Please
contact us regarding this matter.
AAI Graphite X Bar - AAI Replacement Rail

- Meets FIG, USAG, NCAA and NFHS competition specifications
AAI Graphite X Bar
$525.00
|
|
|
| |
|
|
AAI SRS System

- Decreases by 29% the required space for the uneven cabling system
- Maintains the stability of the unit within a 152" x 160" area
- the SRS system reduces the floor print of the bars.
- If the gym is small or the gym owner wants to put bars close to another bar set or in a small space,
this allows them to do that.
|
|
SRS Pads - Set of Four
$179.00
|
UTP Cables
- Fits all AAI Unaven Bars
- This is actually a replacement cables.
- Sold as a pair
UTP Cables - per pair
$77.00
|
AAI ELite Horizontal Bar

- Meets all FIG, USAG, NCAA and NFHS competition specifications
- Height adjusts from 88-5/8" to 116-1/8" (225 to 295 cm)
- Four aircraft style cables attach to swivel anchors, and spring loaded snap pin provides maximum accuracy of height and security
- Requires four floor plates (not included)
AAI Elite Horizontal Bar
$2600.00
|
Note : Based on data supplied by the FIG Safety Symposium, AboutBallet.com strongly recommends that the horizontal bars and mounting collars
be examined for wear on a regular basis, and be replaced every three (3) years, to reduce the possibility of breakage.
Spotting Platform

- Easily adjustable up and down the bar
- Requires only your weight to lower the platform
- Automatically retracts up to its resting position once you leave the platform
- 5' by 24" platform
- Can be attached to any 2" diameter round uprights (single bar trainer), 2-3/8" diameter uprights (high bar and uneven bars) and 2" square
uprights (ring tower)
- Maximum weight of 200 lbs sustained per side
Spotting Platform
$725.00
|
2" ID Round Clamp
$149.00
|
|
|
2" ID Square Clamp
$149.00
|
Adjustable Single Bar Trainer

- Bolts to concrete flooring, providing great stability
- Base footprint utilizes three anchor bolts on each upright
- An anchor bolt plate has been added to eliminate excessive outside flexing seen on the typical two bolt systems
- Single plunger-pin and tension handle provides easier adjusting with the use of only one knob
- Rail adjusts from 5" to 60" in height
- Floor anshors not included
- A very affordable option!
Adjustable Single Bar Trainer
with Graphite X Rail
$949.00
|
Adjustable Single Bar Trainer
without Rail
$439.00
|
AAI Assist Step

- Design to give the athlete a place to stand while adjusting the bar
- Built in spring secures the step on the casting for superior support
- Can quickly be positioned at various heights on both inside and outside of the bar
- Compact size at 7" x 6" x 1.25" (178 x 135 x 32mm)
- Includes two steps, one for each upright
Gymnastics Bar Straps

- Ensures a safe, low friction glide when training
- Sewn with ½ twist to lay flat on the bar
- Package includes five pairs of straps in varying lengths and colors: 25", 25¾", 26½", 27¼" and 28"
Gymnastics Bar Straps
$39.00
|
|